Saw User Manual

Section B: The application example as demonstration

system

li ti

Flying Saw with SIMOTION A4027118-A0414

V 1.4 Release 06/06/08 58/107

Manual_SIMOTION Flying Saw_V1.4.doc

Here, you can set the velocities for the return to the

starting position and also when returning to the starting

position in the automatic mode

Display areas

Fig. 5-8: Flying saw mode

This area informs you about the selected and presently active operating

mode of the FlyingSaw FB.

Fig. 5-9: Actual velocity / position

In this area, the actual velocity [mm/s] and the actual position [mm] are

displayed for the material and flying saw axis.