Saw User Manual

Section B: The application example as demonstration

system

li ti

Flying Saw with SIMOTION A4027118-A0414

V 1.4 Release 06/06/08 53/107

Manual_SIMOTION Flying Saw_V1.4.doc

5.2.4 Operator control functions in the setting-mode

In the manual mode, the material web and flying saw can be manually

moved.

This standard application does not require any functions that may only be

executed in the setting-up mode. This is the reason that we are only

providing users with an empty screen form that can be adapted, when

required - to the specifications and requirements of the user’s application.

Fig. 5-6 MANUAL operator control screen form for the operator functions in the setting-up mode