Saw User Manual

Section B: The application example as demonstration

system

li ti

Flying Saw with SIMOTION A4027118-A0414

V 1.4 Release 06/06/08 50/107

Manual_SIMOTION Flying Saw_V1.4.doc

The following functions can be selected using the individual buttons:

Table 5-2 General buttons to control/handle the screen forms

Button Function

You can access the pre-setting screen from every operator

screen using the SETTINGS button.

You can access the setting-up screen from every operator

screen using the MANUAL button.

If the application is in the IDLE or AUTOMATIC-STOPPED

modes, the MANUAL mode is selected

You can access the automatic screen from every operator

screen using the AUTO button.

If the application is in the IDLE or MANUAL modes, the

AUTOMATIC-STOPPED mode is selected

You can access the technology screen from every operator

screen using the TECHNOLOGY button.

You can access the status screen from every operator

screen using the STATUS button.

You can access the welcome screen (home) from every

operator screen using the HOME button.

If the application is in the MANUAL or AUTOMATIC-

STOPPED modes, the IDLE mode is selected