Saw User Manual

Section B: The application example as demonstration

system

li ti

Flying Saw with SIMOTION A4027118-A0414

V 1.4 Release 06/06/08 47/107

Manual_SIMOTION Flying Saw_V1.4.doc

5.2 Detailed operating instructions

A detailed description of the application is provided in these instructions.

This is necessary so that you can get to know and test the CPU functions.

Prerequisites

The following prerequisites must be fulfilled to use the application example:

• The STEP7 project is available online in the S7-CPU.

• The parameterization for the application has been downloaded into

SIMODRIVE.

• All of the devices are powered-up.

• At least WinCCflex Advanced 2007 Hotfix 4 is installed on the PC/PG.

Note

WinCCflex requires the appropriate authorization. Authorization for at

least 256 power tags is required.