Saw User Manual

Section B: The application example as demonstration
system
I t lli
hd
d
ft
Flying Saw with SIMOTION A4027118-A0414
V 1.4 Release 06/06/08 40/107
Copyright © Siemens AG 2008 All rights reserved
Manual_SIMOTION Flying Saw_V1.4.doc
12
Now switch the SIMOTION D435 into the
RUN state.
To do this, click on the SIMOTION-CPU and
with the righthand mouse key and target
device/operating state, go to the operating
state display.
13 Here, click on the RUN button
The SIMOTION D435 is then in RUN and the
demonstration case is now ready to be used
for the presentation!