Saw User Manual

Section B: The application example as demonstration
system
I t lli
th
hd
d
ft
Flying Saw with SIMOTION A4027118-A0414
V 1.4 Release 06/06/08 39/107
Copyright © Siemens AG 2008 All rights reserved
Manual_SIMOTION Flying Saw_V1.4.doc
6
After starting the download, you will be
prompted as to whether you wish to “copy
RAM to ROM“ after the download. Always
answer this question with Yes as otherwise
your program must be again downloaded
after power ON/OFF.
This copy operation only refers to the
SIMOTION part of the project
7
Once the download has been completed,
please acknowledge with OK
8
Also acknowledge the data that has been
successfully copied from the RAM to ROM
with OK
9
The system now prompts you whether you
wish to also copy the parameters of
SINAMICS_Integrated from the RAM to the
ROM.
Also answer this with Yes
10
Also acknowledge the data that has been
successfully copied from the RAM to ROM
with OK
11
After the download has been completed, you
will see the adjacent diagnostics overview.