Saw User Manual

Section B: The application example as demonstration

system

I t lli

Flying Saw with SIMOTION A4027118-A0414

V 1.4 Release 06/06/08 36/107

Manual_SIMOTION Flying Saw_V1.4.doc

The Ethernet interface IE2 (X130) of

SIMOTION D435 has, as standard, the

IP address 169.254.11.22.

Select “Use the following IP address”

and enter the IP address 169.254.11.23.

Enter 255.255.0.0 as “Subnet mask”.

The address set above must be identical

to the address for the PG/PC. Check this

address by selecting the PG/PC

interface in Netpro and, if required,

modify this.

Acknowledge your changes by pressing

twice on OK.

4.4.5 Downloading the hardware configuration after a factory setting

To download the hardware configuration, please proceed as follows

Table 4-4: Downloading the hardware configuration after a factory setting

No. Action Comment

Now go into the hardware configuration

and press the Download to target

module button