Saw User Manual

Section B: The application example as demonstration
system
I t lli
th
hd
d
ft
Flying Saw with SIMOTION A4027118-A0414
V 1.4 Release 06/06/08 32/107
Copyright © Siemens AG 2008 All rights reserved
Manual_SIMOTION Flying Saw_V1.4.doc
4.4.4 Setting the Ethernet interface of the PG/PC
Setting the PG/PC interface
Table 3-5: Setting the PG/PC interface
No. Action Comment
1
In SIMOTION SCOUT open the interface
configuration using O
PTIONS Æ SET
PG/PC INTERFACE...
2
In the “Interface Parameter Assignment
Used” area, select your Ethernet
card/interface of the PG/PC using the
interface setting “TCP/IP Æ ......”.
(e.g. "TCP/IP Æ VIA PCI 10/100 Fast
Ethernet Adapter“)
3
Acknowledge (possible) warning with
Yes.
4
Acknowledge your change with OK
5
Now return to SIMOTION SCOUT and
open the network configuration
NETPRO using the button or the
menu P
ROJECT Æ OPEN NETPRO .