Saw User Manual

Section B: The application example as demonstration

system

I t lli

Flying Saw with SIMOTION A4027118-A0414

V 1.4 Release 06/06/08 28/107

Manual_SIMOTION Flying Saw_V1.4.doc

4.3 Installing the standard SIEMENS software

Minimum required releases

Table 4-3 Versions

Component Version.

STEP 7 V5.4 + SP2

SIMOTON SCOUT V4.1.1.6

WinCCflex Advanced 2007 Hotfix 4

Installation

Please install the following

• Step 7 V5.4 incl. SP2

• SIMOTION SCOUT V4.1.1.6

• WinCCflex 2007 Hotfix 4 Advanced

(with the option: Integration in Step 7)

Please follow the instructions of the installation programs.

4.4 Downloading the user program and parameterizing the drive in

the SIMOTION D demonstration case

4.4.1 De-archiving the SIMOTION project

• Open SIMOTION SCOUT

• De-archive the SIMOTION project and open it using SIMOTION

SCOUT

4.4.2 Resetting SIMOTION D435 to the factory settings

In order to obtain a fixed starting point for the description on how to

download the user program into the demonstration case, restore the factory

setting at the demonstration case as described below:

• Power-down the demonstration case

• Set the mode switch SIMOTION D435 to setting 3 (MRES)

• Power-up the demonstration case