Saw User Manual

Section E: Appendix

Error messages

Flying Saw with SIMOTION A4027118-A0414

V 1.4 Release 06/06/08 105/107

Manual_SIMOTION Flying Saw_V1.4.doc

ErrorID

error code

Explanation

C091 Manual to Disable

Error when stopping the FlyingSawAxis ( move mit v=0)

Details in FS_Var structure under RetDINT_stop_FSA

C092 Manual to Disable

Error when stopping the FlyingSawAxis ( move mit v=0)

Details in FS_Var structure under FR_stop_FSA

C0A1 Manual to Starting position

Error when positioning the FlyingSawAxis ( _pos )

Details in FS_Var structure under RetDINT_pos_FSA

C0A2 Manual to Starting position

Error when positioning the FlyingSawAxis ( _pos )

Details in FS_Var structure under FR_pos_FSA

C0F1 Incorrect mode selection from “error” mode

C0F2 Incorrect mode selection from “disable” mode

C0F3 Incorrect mode selection from “starting position” mode

C0F4 Incorrect mode selection from “automatic” mode

C0F5 Incorrect mode selection from “manual” mode

C101

Parameterizing error at the flying saw axis

Axis is not parameterized as synchronous axis.

C201

Parameterizing error at the material axis/external encoder

The material master (leading) value is neither a positioning axis

nor an external encoder