Technical data

Product Overview
1-18
High Speed Counter Encoder Module User Manual
Counting with 16-Bit Counters (continued)
You can select a 16-bit counter mode by setting the appropriate bits in the
Setup W ord (WY20). Cascade counting requires that a jumper be
configured. Y ou can configure the 16-bit counters to count in one of the
following modes:
• Retriggerable one-shot.
• Divide-by-N, 16-bit counting.
• T riggered Strobe.
• Square W ave generator .
• Cascade counting.
Appendix A presents applications of the 16-bit counters in cascade mode;
and in binary , up/down, recycle mode.
16-Bit Counter
Modes