User manual

Using @aGlance with Excel A-3
SIMATIC PCS 7 OSx 4.1.1 @aGlance
Editing the @aGlance/IT Configuration Utility To open the
@aGlance/IT Excel add-in in your Windows Program Manager window, click
Start ->Programs ->@aGlance ->@a Glance/IT Administra tion. The Administration
dialog box appears (Figure A-1). Enter the station name for the server. If
your SIMATIC PCS 7 OSx system has two networks, make two entries,
following the conventions noted above for the
hosts file. Make sure that the
case matches that of the station name you specify in the
hosts file. For the
Transport protocol, select
ONC.WhenyouselecttheAdd button, the station
name appears in the Server Host=Transport field.
The order of the station names in the Server Host window determines the
order in which @aGlance attempts to access them. If a network fails, you
may want to reorder the station names to avoid timeout delays.
@aGlance/IT Administration Tool
Server Hosts Proxies Permissions
OK Cancel Apply Help
Server Host
Server Host=Transport
Transport
ONC
ACA
List Servers
Replace
A
dd
Remove
MoveUp
MoveDown
sco29a=ONC
Figure A-1 Using the @aGlance/IT Administration Tool
If the @aGlance menu bar selection does not show up in the Excel tool bar,
you can add it by following these steps.
1. Open an Excel spreadsheet.
2. Select
Tools, Addins. An Add-in dialog box appears.
3. Click the
@aGlance/IT Version 3.2 Addin item in the Add-ins list.
An X should appear in the box preceding the item.
4. Select
OK. Excel adds the @aGlance item to the menu bar.
Adding @aGlance
to the Tool Bar