User manual

Using SIMATIC PCS 7 OSx @aGlance 1-7
SIMATIC PCS 7 OSx 4.1.1 @aGlance
1.3 Installing the SIMATIC PCS 7 OSx @aGlance Option
If you ordered @aGlance with your SIMATIC PCS 7 OSx system, it is
already installed for you. If you ordered the @aGlance option at a later date,
follow the steps below to install it.
1. If OSx is running, select
Controls ->Logon o n th e m e n u bar an d lo g in as
root.
2. Click
Controls ->Change System State and select Shutdown OSx .
3. Press the left mouse button to bring up a root menu, select
New Xterm,
and log in as root.
4. Insert the CD with the title SIMATIC PCS 7 OSx V4.1.1, Disk 2 in the
CD-ROM drive.
5. Type install.new and press
Enter.
6. The screen prompts you for the SIMATIC PCS 7 O Sx Options
Activation Key. Enter the key exactly as it appears on the options
license. A list of options appears that includes all options that are
currently licensed for the station. For example:
Number Installed? Licensed? Description
1 Yes Yes E4.1.1 Supervisor S/W
2 No No E4.1.1 HP X Terminal S/W
3 Yes Yes E4.1.1 Tektronix X Terminal S/W
4 No No E4.1.1 RDT Oracle S/W
5 No No E4.1.1 RDT Sybase S/W
6 No No E4.1.1 One User OSx @aGlance Server S/W
7 Yes Yes E4.1.1 Ten User OSx @aGlance Server S/W
If this is a supervisory station, or if other options have been previously
installed, the above list appears first, and you are then prompted to
enter the new OSx Options Activation Key. Your new key includes all
previous options licensed for this station, as well as @aGlance.
Installation of @aGlance begins and may take several minutes.
7. When the installation is complete, the following prompt appears:
Enter the number of an option to install/re-install, or enter
a new OSx Options Activation Key or enter q to quit.
Type q to quit and press Enter.
8. Reboot the system. The station is now ready to use OSx @aGlance.
Installation:
OSx Side