Setup guide

OSx Migration Cookbook August 30, 2006
Appendix E – System Evaluation Tool Instructions
Installing, Compiling and Running the Software Tool
The following steps should be done on the Primary station of the PCS/OSx system being
of the Tistar Model 20 being evaluated.
g:
3. Inse ol floppy into the floppy drive.
4. Load the software tool source code into the /tmp directory by typing:
opriate software tool source
type:
ys_eval/312A412A
On 1.3.3 systems type:
cd /tmp/sys_eval/tistar
6. Compile the source code by typing:
compile_it
Warning C4046 can be safely ignored on Tistar systems.
7. Run the software tool by typing:
system_data > data.txt
8. View the data using the appropriate file viewer.
On 1.3.3, 3.0.2E, 3.1.0B, 3.1.2A, 4.0.0B, or 4.1.0A systems type:
pg data.txt
evaluated or on the onboard IGT
1. Log into Linux or Unix as user ‘tistar’.
2. Set the current directory to be /tmp by typin
cd /tmp
rt the Linux/Unix software to
tar xvf /dev/fd0
5. Set the current directory to be the directory of the appr
code.
On 3.1.2A, 4.0.0B, 4.1.0A, 4.1.1, or 4.1.2A systems
cd /tmp/s
On 3.0.2E or 3.1.0B systems type:
cd /tmp/sys_eval/302E310B
72