Setup guide

OSx Migration Cookbook August 30, 2006
Appendix E – System Evaluation Tool Instructions
Transferring the Software Tool to a Linux/Unix Floppy
oard This procedure should be done on any station of a PCS/OSx system or on the onb
IGT of a Tistar Model 20.
Perform the following steps on 1.3.3, 3.0.2E, 3.1.0B, 4.0.0B, and 4.1.0A systems.
1. Save the compressed floppy disk image to an MS Windows floppy.
2. Log into Unix as user ‘root’
Set th3. e current directory to /tmp by typing:
the floppy drive
ool.Z tool.Z
7. Remove the MS Windows floppy from the floppy drive and insert a new empty DOS
formatted floppy
8. Copy the disk image to the floppy disk by typing:
dd if=tool of=/dev/fd0 bs=48k
9. Remove the uncompressed floppy image by typing:
rm tool
10. Exit the Unix command line by typing:
exit
The result is a Unix floppy containing the software tool.
cd /tmp
4. Insert the floppy disk into
5. Copy the compressed floppy disk image into the /tmp directory by typing:
doscp a:t
6. Uncompress the image by typing:
uncompress tool.Z
70