Setup guide

OSx Migration Cookbook August 30, 2006
Appendix E – System Evaluation Tool Survey Questionnaire
b) List the new
PCs that the customer will need and who will supply them using the
form below.
3.
ho will be supplying the Operating System for the new PCs?
ents:
Comments:
PC Operating System Software
PCS 7 runs on MS Windows 2000.
W
Comm
4. Network Hardware/Topology
Tistar:
Tistar systems use the proprietary Tiway network to communicate with PLCs.
or t
Ad the CP1434TF modules. This
fro
Are CP1434TF modules needed and how many?
OS
Conversion to PCS 7/505 OS requires running Industrial Ethernet and installing one
wo CP1434TF modules in each PLC. Decide whether to run AUI or TP cabling.
ditionally, H1 software is needed to program
software may come with new CP1434TF cards or is available as a free download
m Siemens.
Will H1 software be needed?
x/PCS
: OSx/PCS connects to 505 series PLCs using AUI (Coaxial) cabling or TP
with a TP-to-AUI converter at each CP1434TF module in each PLC. Only systems
usi ng 3COM 3C900 network cards can use TP cables.
PCS 7/505 OS
: Servers can communicate with the PLCs using either AUI or TP
les. Servers communicate with clients via TP cables. cab
Do new network cables need to be run and will these be AUI or TP?
48