Setup guide

OSx Migration Cookbook August 30, 2006

Appendix E – System Evaluation Tool Survey Questionnaire

ection 1 – System Architecture

nning

cat /usr/tistar/bin/deu.ver

stem

a) From the attached OSx/PCS/Tistar System Architecture Drawing Templates,

b) Complete and attach a block diagram of the system architecture for this system in

Visio. Or,

c) Attach a copy of the customer’s system architecture drawing with this area and/or

system specific components identified.

2. Computer Hardware

1. OSx/PCS/Tistar Version

You can get this information by logging into Linux or Unix as user tistar and ru

the following command:

PAS R&D should be contacted for further help if the system version is other than

4.1.2A, 4.1.1, 4.1.0A, 4.0.0B, 3.1.2A, 3.1.0B, 3.0.2E, 2.0.1, 2.0.0P1, 1.3.3.

What version of OSx/PCS/Tistar is involved?

Comments:

2. Architecture Block Diagram

Provide a block diagram of the system architecture that best represents the sy

you are evaluating.

select the most appropriate system design. “X” out any non-applicable items, a

include clarification comments as required. Or,

Most OSx/PCS/Tistar hardware cannot be reused for PCS 7/505 OS. New PCs must

be purchased.

PCS/OSx

: list the customer’s current stations using one of the forms below.

Tistar

: describe the system using the forms below.

a) Use the PC Requirements Tables below to determine what new

PCs will be

needed to satisfy the customer requirements. Check the latest PCS 7/505 OS

readme file for any changes.