Technical data

Mounting
4.2 Technical data of the telescopic rails
SIMATIC Rack PC IL 43
4-2 Getting Started, Edition 09/2005, A5E00432882-01
Note
For vertical operation, install the device on a horizontal metal base and secure it against
tipping. The following decide bases are available from Rittal for this purpose:
Rittal Type TE 7000.620, Rittal Type VR 3861.580, Rittal Type DK 7063.710.
Please refer to the case manufacturer's instructions regarding device bases.
Caution
Danger of bodily harm!
It is not permitted to install the device only on the 19" brackets of the front panel.
4.2 Technical data of the telescopic rails
Ultimate load per pair Minimum 30 kg
Full extraction length Minimum 470 mm
Rail thickness Maximum 9.7 mm
Fixing Screws M5 x 6 mm
The mounting screws of the telescopic rails may not protrude by more than 5 mm into the
enclosure.