Specifications

SIMATIC Rack PC IL 40 S Expansions

4-3

SIMATIC Rack PC IL 40 SManual

A5E00200171-01

Tools

You can carry out all necessary installation work on the Rack PC with screwdrivers

of the TORX T8, TORX 10 and TORX T15 types.

4.1.2 Opening the Housing Cover

To open the housing cover, proceed as follows:

1. Pull out the power supply connector.

2. If necessary, remove all cable connectors and connecting cables from the

device.

3. If necessary, take the PC out of its support/cabinet.

4. Undo the 3 fixing screws (1) of the housing cover.

5. Lift up the housing cover gently from behind and then pull it out of the guide

groove (2).

6. Then you can remove the housing cover.

Figure 4-1 Opening the housing cover