Technical data

Appendix A: Technical Data
A-3
SIMATIC Panel PC 670 / 870 Operating Unit, Equipment Manual
Edition 07/02
A.2 Technical specifications for Panel PC operating unit with remote
mount form factor
This section describes the technical specifications that differ from those of the stan-
dard mount form factor.
Table A-2 Properties of the operating unit with receiver
Electrical data
AC power supply DC power supply
Power input
Max. 0.67 A (120 V) / max. 0.48 A (240 V) Max. 1.7 A (24 V)
Power input Max. approx. 70 VA Max. approx. 41 W
Safety
IEC corresponding to DIN VDE 0805/11.93
Approvals: CE, cULus to UL508/, FCC
Dimensions/weight 12” 15” 12” Touchscreen 15” Touchscreen
Mounting dimensions
W x H x D
1
)
– in mm
– in inches
450 x 290 x 69
17.7 x 11.4 x 2.71
450 x 327 x 91
17.7 x 12.9 x 3.58
368 x 290 x 85
14.5 x 11.4 x 3.34
450 x 290 x 91
17.7 x 11.4 x 3.58
Weight Operating unit alone: approx. 8,4 kg depending on configuration
Mounting
Up to 70° inclination from vertical
1) Mounting depth exclusive space for cables and ventilation
Table A-3 Properties of Interconnecting Cable
Design SIMATIC HMI Cu Link cable
Connectors at both ends 15-pin sub D connectors
Diameter Bending radius Torsion Tensile stress
11 mm Min. 66 mm
Max. 30 ° / m
Max. 50 N / mm
2
Travel rate Acceleration
Number of bending
cycles
Insulating material
Max. 3 m / s Max. 5 m / s
2
10 000 000
Free from silicone
and CFCs
Sheath material
PU, flame-retarding to IEC 60 332.1; Oil-resistant to VDE 0472, Part 803,
Test category B
2 m 5 m 10 m 20 m
Order numbers (MLFBs)
6XV1440-7AH20 6XV1440-7AH50 6XV1440-7AN10 6XV1440-7AN20
A.3 Possible operating unit and computing unit combinations
Table A-4 Possible operating unit and computing unit combinations
Display 10.4” TFT 12.1” TFT 15.1” TFT 12.1” TFT
touchscreen
15.1” TFT
touchscreen
PC 670, standard n n n n n
PC 670,remote – n n n n
PC 870, standard – n n – n
PC 870, remote – n n n n