Technical data

Notes on the Panel PC 670/870 11/01
2–12 SIMATIC Panel PC 670/870 Commissioning Instructions
A5E00135748-01
The languages installed are listed in the above dialog. The bottom field indicates
the language currently set.
In order to change the languages, select the relevant language in the bottom field.
The change takes effect when the user logs off and on again or initiates a restart.
If the user interface language should be changes to one of the four Asian select
Start
→ Settings → Control Panel → Language. The following window appears.
Figure 2–5 Language setting
In order to define a standard language, select the Define standard button. Select
the language required in the window which subsequently opens. Confirm the
selection by clicking OK twice.
Notice
If the standard language is not selected as described, applications do not display
the Asian characters correctly.