Technical data

SIMATIC Panel PC 670/870 Commissioning Instructions i
A5E00135748-01
1 Preface
Purpose
This Commissioning Instruction manual is a component part of the
documentation for the SIMATIC Panel PC 670 and SIMATIC Panel PC 870
(subsequently referred to as Panel PC 670/870). It provides installation
engineers, system operators and maintenance staff with information concerning
installing and commissioning the Panel PC 670/870.
Caution
The contents of the Commissioning Instructions of the Panel PC 670/870 are
superordinated to those of the Equipment Manual of the Panel PC 670/870.
Siemens AG assumes no liability resulting from failure to observe the
instructions.
Documentation
• Commissioning Instructions (this document)
The startup instructions are supplied on paper. It is directed at startup
personnel and system administrators.
The commissioning instructions briefly describe the major steps required for
starting up the hardware and software.
• SIMATIC Panel PC 670, Operating Unit, Equipment Manual
SIMATIC Panel PC 870, Operating Unit, Equipment Manual
This manual is supplied in electronic form with the Panel PC 670/870 in
PDF format on CD. The device manual is directed at startup personnel and
service/maintenance technicians, who install the Panel PC and perform
maintenance tasks on the operating unit.
In addition, the device manual provides an overview of the application of the
operating unit's control elements.
• SIMATIC Panel PC 670, Computer Unit, Equipment Manual
SIMATIC Panel PC 870, Computer Unit, Equipment Manual
The manual is supplied in electronic form with the Panel PC 670/870 in PDF
format on CD. It is directed at startup personnel and service/maintenance
technicians who install expansions or perform error analyses on the
computer unit.