Technical data

Technical data
7.6 Standards, Approvals, Certificates, Guidelines, Labels and Declarations
TS Adapter IE Basic
74 Manual, 08/2014, A5E02615140-03
cULus approval, Hazardous Location
cULus Listed 7RA9 INT. CONT. EQ. FOR HAZ. LOC.
Underwriters Laboratories Inc. to
● UL 508 (Industrial Control Equipment)
● CSA C22.2 no. 142 (Process Control Equipment)
● ISA-12-12-01 (Hazardous Location)
● CSA-213 (Hazardous Location)
APPROVED for Use in
● Cl. 1, Div. 2, GP. A, B, C, D T4A
● Cl. 1, Zone 2, GP. IIC T4
Note
The system installation must be compliant with NEC (National Electric Code)
requirements.
For use in Class I, Division 2 environments, the TS
Adapter IE Basic must be installed in
a cubicle with minimum IP5
4 protection to IEC 60529.
Information on use of the TS
Adapter IE Basic in Zone 2 hazardous areas is contained in
the "Product
Information ATEX Zone 2.pdf" file.
It is located on the product DVD in the "_Product_Information" folder.
WARNING
Explosion Hazard
Do not disconnect while circuit is live unless area is known to be non-hazardous.
Explosion Hazard - Substitution of components may impair suitability for Class I,
Division 2 or Class I, Zone 2.