Technical data

Technical data

7.4 Mechanical and Climatic Ambient Conditions for Operation of the TS Adapter IE Basic

TS Adapter IE Basic

70 Manual, 08/2014, A5E02615140-03

7.4

Mechanical and Climatic Ambient Conditions for Operation of the

TS Adapter IE Basic

Operating conditions

The TS Adapter IE Basic is designed for stationary use in weather-proof locations. The

TS Adapter IE Basic fulfills the operating conditions for DIN IEC 60721-3-3:

● Class 3M3 (mechanical requirements)

● Class 3K3 (climatic ambient conditions)

Operation with additional measures

The TS Adapter IE Basic may not be used without additional measures in the following

environments:

● In locations with high levels of ionizing radiation

● In locations subject to difficult operating conditions, such as dust, aggressive fumes or

gases, severe electrical or magnetic fields

● In installations requiring special monitoring, such as elevators and electrical systems in

high risk areas

A suitable additional measure might be installation of the TS Adapter IE Basic in a cabinet or

cubicle for example.

Mechanical ambient conditions

The mechanical environmental conditions for the TS Adapter IE Basic are specified in the

following table in terms of sinusoidal vibrations.

Table 7- 4 Mechanical ambient conditions

Frequency range in Hz

Test values

5 ≤ f < 9

3.5 mm amplitude

9 ≤ f < 150

9.81 m/s

constant acceleration

Reduction of vibration

If the TS Adapter IE Basic is subjected to greater shocks or vibrations, you must take

appropriate measures to reduce acceleration or amplitudes.