Technical data

Error diagnostics
6.2 Logon to the Web interface fails
TS Adapter IE Basic
56 Manual, 08/2014, A5E02615140-03
Table 6- 2 LED displays for the Ethernet interface
LED
Cause
Remedy
Link
(green)
RX/TX
(yellow)
Off Off
No Ethernet cable inserted
Insert the Ethernet cable.
No connection to the receiver
Check the receiver.
Lit – Ethernet cable inserted
Functional connection
–
Lit Flashes Data is transmitted through the Ethernet
interface.
–
The LEDs link and RX/TX are located behind the lower front panel of the TS
Adapter IE Basic.
– any
6.2
Logon to the Web interface fails
Error message
"The user name or password is unknown to the TS Adapter IE Basic. Log on with a known
user name."
Possible cause
It may be that the user name and password you entered are not registered in the user
management system of the TS Adapter IE Basic.
Remedy
1. Reset the TS Adapter IE Basic to its default configuration using the P RES button.
Note
If you reset the configuration of the
TS Adapter IE Basic, all parameter settings you have
made will be lost.
2. Log on to the TS Adapter IE Basic with the user name "Administrator" and the password
"admin".