Technical data

Commissioning
4.13 Resetting the Configuration with P RES button
TS Adapter IE Basic
Manual, 08/2014, A5E02615140-03
51
Procedure
NOTICE
Parameter settings will be lost
If you reset the configuration of the TS Adapter IE Basic, all the parameter settings you
made will be lost and the preset "admin" password is reactivated.
1. Use a sharp implement, such as a paper clip, to press the P RES button and hold it down
for about 2 seconds.
The TS Adapter IE Basic acknowledges the P RES reset by flashing the the yellow LED
Run three times.
Result
The TS Adapter IE Basic is reset to its default configuration in the factory state.