Technical data

Commissioning
4.10 Setting the E-mail Parameters
TS Adapter IE Basic
48 Manual, 08/2014, A5E02615140-03
4.10
Setting the E-mail Parameters
Requirement
● The Web interface of the TS Adapter IE Basic is open.
Sending e-mail
The TS Adapter IE Basic routes IP telegrams between its Ethernet port and the remote
connection to a dial-up server, such as to an Internet Service Provider (ISP).
Parameters for sending e-mail
If you want the TS Adapter IE Basic to support e-mailing, you must make settings in the
following tabs in the Web interface:
● "Parameter > TS Module"
● "Parameters > IP Parameters"
● "Parameters > Outgoing Calls"
● "Security > Outgoing Calls"
For more details, refer to the online help for the relevant tabs of the Web interface.
If e-mailing does not work with the TS Adapter IE Basic , go to section "Not possible to send
e-mail (Page 63)".
Result
Once you have set the parameters, you can send an e-mail to an e-mail server from a
SIMATIC CPU via the TS Adapter IE Basic.