Technical data

Commissioning

4.9 Setting Remote Maintenance Parameters

TS Adapter IE Basic

Manual, 08/2014, A5E02615140-03

4.9

Setting Remote Maintenance Parameters

Requirements

● You have correctly set the IP parameters for the network and for the modem.

● The Web interface of the TS Adapter IE Basic is open.

Remote maintenance parameters

The TS Adapter IE Basic is configured such that it is possible to establish a remote

connection in most cases. If you are unable to establish a remote connection, refer to the

section "Error diagnostics (Page 55)".

When a remote connection has been made, you can carry out remote maintenance of the

automation components connected to the TS Adapter IE Basic via Ethernet. For the

TS Adapter IE Basic to support remote maintenance, you must make settings on the

following tabs of the Web interface:

● "Parameter > TS Module"

● "Parameters > IP Parameters"

● "Security > User Management"

For more details, refer to the online help for the relevant tabs of the Web interface.

If remote maintenance is not possible, refer to the section "Error diagnostics (Page 55)".

Result

When you have set the parameters, you can establish a remote connection to the

TS Adapter IE Basic under a newly configured user name.