Technical data

Commissioning
4.8 Open Web interface
TS Adapter IE Basic
46 Manual, 08/2014, A5E02615140-03
4.8.6
Open Web interface using a remote connection with a browser
Note
Through a remote connection, you can also reach the Web
interface of the
TS
Adapter IE Basic if you have not yet assigned an IP address.
Procedure
1. Connect the TS Adapter IE Basic via a phone cable to the phone network.
2. Connect the TS Adapter IE Basic to the power supply.
3. Establish a remote connection from your PC to the TS Adapter IE Basic.
4. Start a browser and as the address state the IP address of the TS Adapter IE Basic you
have already assigned (the IP address can be taken from the connection status of the
remote connection).
5. Enter the user name and password.
6. Click "Logon".
Result
You see the Web interface start screen.
IP parameters
You can set the IP parameters in the "Parameters > IP Parameters" tab of the Web interface.