Technical data

Commissioning
4.8 Open Web interface
TS Adapter IE Basic
Manual, 08/2014, A5E02615140-03
45
4.8.5
Open Web interface using a remote connection with TeleService
Note
Through a remote connection, you can also reach the Web interface of the
TS
Adapter IE Basic if you have not yet assigned an IP address.
Procedure
1. Connect the TS Adapter IE Basic via a phone cable to the phone network.
2. Connect the TS Adapter IE Basic to the power supply.
3. Establish a modem connection from your PG/PC to the TS Adapter IE Basic with
TeleService. You will find details of the procedure in the online help or in the TeleService
manual.
4. Select the TeleService menu command "Options > Administrate TS Adapter IE ...".
Result
You see the Web interface start screen.
IP parameters
You can set the IP parameters in the "Parameters > IP Parameters" tab of the Web interface.