Technical data

Commissioning

4.8 Open Web interface

TS Adapter IE Basic

Manual, 08/2014, A5E02615140-03

4.8.3

Open Web interface in direct connection with TeleService

Requirements

● You have installed TeleService from the "SIMATIC TeleService Edition" DVD in

accordance with the installation instructions in the TeleService manual.

● You have already set the IP parameters of the TS Adapter IE Basic.

● The IP address of your PG/PC's interface card is in the same subnet as the IP address

you assigned to the TS Adapter IE Basic.

Procedure

1. Connect the TS Adapter IE Basic via an Ethernet cable to your PG/PC.

2. Connect the TS Adapter IE Basic to the power supply.

3. Start the TeleService.

4. To do so, select the menu command "Options > Administrate TS Adapter IE...".

If more than one TS Adapter IE Basic is connected to the interface card of the PG/PC,

the "Select TS Adapter IE" dialog box opens.

5. Select the TS Adapter IE Basic based on its MAC address, if necessary, and confirm with

OK.

6. Enter your user name and password in the "Administrate TS Adapter IE" dialog box.

7. Click "Logon".

Result

You see the Web interface start screen.