Technical data

Commissioning
4.8 Open Web interface
TS Adapter IE Basic
42 Manual, 08/2014, A5E02615140-03
4.8.2
Open Web interface via a remote connection with the TIA Portal
Note
Through a remote conne
ction, you can also reach the Web interface of the
TS
Adapter IE Basic if you have not yet assigned an IP address to the TS Adapter IE Basic.
Requirements
● You have connected and commissioned a modem or ISDN-TA on your PG/PC (with
installed TIA Portal software).
● You have connected the TS Adapter IE Basic to your power supply.
● You have connected the TS Adapter IE Basic to the telephone network via a telephone
cable.
● You have already set the IP parameters of the TS Adapter IE Basic.
● You have established a modem connection with the TIA Portal from your PC to the
TS Adapter IE Basic. You will find details of the procedure in the information system of
the TIA Portal by searching for the keyword "Establish remote connection with
TeleService".
Procedure
1. Start the TIA Portal on your PG/PC.
2. In the project navigation for the TIA Portal, select the menu command "Online access >
TeleService > <Plant>".
3. Double-click on the command "Assign parameters for TS Adapter IE".
Result
The Web interface of the TS Adapter IE Basic is displayed in the working window of the
TIA Portal.