Technical data

Commissioning
4.8 Open Web interface
TS Adapter IE Basic
40 Manual, 08/2014, A5E02615140-03
Configuration dialogs
The Web interface of the TS Adapter IE Basic contains the following tabs:
● "Information > Adapter"
● "Information > TS Module"
● "Information > Status"
● "Parameter > TS Module"
● "Parameters > Outgoing Calls"
● "Parameters > IP Parameters"
● "Security > User Management"
● "Security > Incoming Calls > SIMATIC protocols"
● "Security > Incoming Calls > Internet protocols"
● "Security > Incoming Calls > Expert mode"
● "Security > Outgoing Calls > General"
● "Security > Outgoing Calls > SIMATIC protocols"
● "Security > Outgoing Calls > Internet protocols"
● "Security > Outgoing Calls > Expert mode"
● "Actions > Firmware Update"
● "Actions > Parameter Set > Export"
● "Actions > Parameter Set > Import"
● "Actions > Parameter Set > Reset"
4.8
Open Web interface
To open the Web interface you have the following options:
● Open Web interface in direct connection with the TIA Portal (Page 41)
● Open Web interface via a remote connection with the TIA Portal (Page 42)
● Open Web interface in direct connection with TeleService (Page 43)
● Open Web interface in direct connection with a browser (Page 44)
● Open Web interface using a remote connection with TeleService (Page 45)
● Open Web interface using a remote connection with a browser (Page 46)