Technical data

Commissioning
4.6 Establishing a Remote Connection to the TS Adapter IE Basic
TS Adapter IE Basic
36 Manual, 08/2014, A5E02615140-03
4.6.2
Establishing a Remote Connection to the TS Adapter IE Basic via TeleService
Requirement
● You have connected and put into operation a modem or ISDN TA on your PG/PC.
● You have installed TeleService from the "SIMATIC TeleService Edition" DVD in
accordance with the installation instructions in the TeleService manual.
Procedure
1. Connect the TS Adapter IE Basic via a phone cable to the phone network.
2. Connect the TS Adapter IE Basic to the power supply.
3. Establish a remote connection from your PG/PC to the TS Adapter IE Basic with
TeleService.
You can find details of the procedure in the online help or in the TeleService manual.
4. Enter the user name and password for logging onto the TS Adapter IE Basic.
When shipped, the TS Adapter IE Basic is configured such that in most cases the remote
connection setup is successful. If you are unable to establish a remote connection, refer to
the section "Error diagnostics (Page 55)". It may be the case that you have to first change
the settings of the TS Adapter IE Basic in the direct connection in order to troubleshoot.
Result
Now you can open the Web interface of the TS Adapter IE Basic with the TeleService. To do
so, select the menu command "Options > Administrate TS Adapter IE...".
You can also carry out remote maintenance using this remote connection.