Technical data

Commissioning
4.6 Establishing a Remote Connection to the TS Adapter IE Basic
TS Adapter IE Basic
Manual, 08/2014, A5E02615140-03
35
4.6.1
Establishing a remote connection to the TS Adapter IE Basic with the TIA Portal
Requirements
● You have connected and commissioned a modem or ISDN-TA on your PG/PC
(with installed TIA Portal software).
● You have connected the TS Adapter IE Basic to your power supply.
● You have connected the TS Adapter IE Basic to the telephone network via a telephone
cable.
Procedure
You can find details of the procedure in the information system of the TIA Portal by
searching for the keyword "Establish remote connection with TeleService".
1. Start the TIA Portal on your PG/PC.
2. In project navigation for the TIA Portal, select the menu command "Online access >
TeleService".
3. Double-click on the command "Establish / disconnect remote connection".
The "Establish remote connection to remote system" dialog box is opened.
4. Make the settings you want and click on the "Dial" button.
When shipped, the TS Adapter IE Basic is configured such that in most cases the remote
connection setup is successful. If you are unable to establish a remote connection, refer to
the section "Error diagnostics (Page 55)". It may be the case that you have to first change
the settings of the TS Adapter IE Basic in the direct connection in order to troubleshoot.
Result
The remote connection is established and displayed with the dial-in number selected in the
project navigation.
The commands made here enable you to assign parameters for the TS Adapter IE Basic or
undertake remote maintenance on the system.