Technical data

Connecting
3.4 Module interface
TS Adapter IE Basic
26 Manual, 08/2014, A5E02615140-03
TS Adapter IE Basic in the direct connection in a networked system
In a networked system, connect the TS Adapter IE Basic over Ethernet to a switch to which a
PG/PC and automation components are connected for example:
Figure 3-7 Direct connection in a networked system
3.4
Module interface
On the left side of the TS Adapter IE Basic you can find the module interface. Depending on
the application, you can plug the respective TS module into this interface.
NOTICE
Modules can get damaged.
Try not to place a module or a component from a different system onto a
TS Adapter IE Basic.
Through constructive measures and coded guide pins, you can ensure that only TS
modules with the TS Adapter IE Basic can be connected. Do not change the mechanical
construction with violence and do not remove or damage the guide pins.
Only plug a TS module into the TS Adapter IE Basic.
You should only connect the TS module to the TS Adapter IE Basic in a de-energized state.
More information about the modules and the modular design can be found in the TS Adapter
modular
manual.