Technical data

TS Adapter IE Basic
Manual, 08/2014, A5E02615140-03
17
Requirements for operation
2
2.1
Software Requirements
Overview
To work with the TS Adapter IE Basic , you need a PG/PC with an MS Windows operating
system and the software (device drivers) for the TS Adapter IE Basic.
The list of the supported operating systems is included in the latest Readme file on the
TS Adapter IE Basic software.
For first-time configuration of IP addresses over a direct connection you will alternatively
need:
● SIMATIC TIA Portal V11.0 or higher
● SIMATIC TeleService V6.1 + SP3 or higher
● SIMATIC Manager of STEP 7 as of V5.4 SP1
For further configuration you will alternatively need:
● SIMATIC TIA Portal V11.0 or higher
● SIMATIC TeleService V6.1 + SP3 or higher
● A browser
To establish a remote connection you will alternatively need:
● SIMATIC TIA Portal V11.0 or higher
● SIMATIC TeleService V6.1 + SP3 or higher
● Windows remote network
2.2
Hardware Requirements
Overview:
To work with the TS Adapter IE Basic you will need a programming device (PG) or a PC with
a DVD-drive and Ethernet port.
More information on TS modules is available in the
Modular TS Adapter manual.