Technical data

PC/TS AdapterQuick Reference Guide
PC/TS Adapter
A5E00078070-03
3
MPI/DP connector
Adapter
RS232 connector
LED “POWER”
LED “ACTIVE”
Switch
“19.2/38.4 kbps”
Figure 1-3 Adapter
The two adapter types differ with respect to the location of the
MPI/DP parameters:
S The MPI/DP parameters for the PC adapter are set in
“Set PG/PC interface”. When opening an online display
for the first time, the parameters are transferred to the PC
adapter.
S The MPI/DP parameters for the TS adapter are set via a
TeleService application and stored permanently on the
TS adapter. When opening an online display for the first
time, these parameters are activated.