Specifications

Working with the TS Adapter IE

7.13 Setting Parameters for Use as Default Router

TS Adapter IE

Manual, 06/2008, A5E00977705-02

7.13 Setting Parameters for Use as Default Router

Requirement

The configuration interface of the TS Adapter IE is open.

Parameters of the TS Adapter IE

If you want to use the TS Adapter IE as the default router, you must make settings in the

following tabs of the configuration interface:

● "Parameters > Modem > Internal Modem" or "Parameters > Modem > External Modem"

● "Parameters > IP Parameters"

● "Parameters > Outgoing Calls"

● "Security > Outgoing Calls > General"

Recommended settings:

"IP Masquerading (NAPT)" active

Firewall active, except "Internet Protocols"

● "Security > Outgoing Calls > Internet Protocols"

Recommended setting:

Allow "HTTP (Hyper Text Transfer Protocol)"

For more details, refer to the online help on the relevant tabs of the configuration interface.

Result

Once you have set the parameters, the TS Adapter IE supports Internet access.