Specifications

Working with the TS Adapter IE

7.12 Sending an E-mail from a SIMATIC CPU

TS Adapter IE

62 Manual, 06/2008, A5E00977705-02

7.12 Sending an E-mail from a SIMATIC CPU

Function block for sending e-mail

To send an e-mail from a SIMATIC CPU, you need the "AS_MAIL" function block from the

STEP 7 "TeleService" block library. The "TeleService" block library is stored on your PG/PC

during installation of TeleService S7-Library under "...Siemens\Step7\s7libs\Tellib32".

Open Online Help for AS_Mail function block

1. Open the "TeleService" block library in the SIMATIC Manager.

2. From the "Blocks" folder, select function block 49, "AS_MAIL".

3. Press the F1 key.

An e-mail cannot be sent

If you are unable to send an e-mail, refer to the section "Not possible to send e-mail".