Specifications

Working with the TS Adapter IE

7.11 Setting the E-mail Parameters

TS Adapter IE

Manual, 06/2008, A5E00977705-02

7.11 Setting the E-mail Parameters

Requirement

● The configuration interface of the TS Adapter IE is open.

Sending e-mail

The TS Adapter IE routes IP telegrams between its Ethernet port and the remote connection

to a dial-up server, such as to an Internet Service Provider (ISP).

Parameters for sending e-mail

If you want the TS Adapter IE to support e-mailing, you must make settings in the following

tabs in the configuration interface:

● "Parameters > Modem > Internal Modem"

● "Parameters > Modem > External Modem"

● "Parameters > IP Parameters"

● "Parameters > Outgoing Calls"

● "Security > Outgoing Calls > General"

Recommended settings:

"IP Masquerading (NAPT)" active

Firewall active, except "Internet Protocols"

● "Security > Outgoing Calls > Internet Protocols"

Recommended setting:

Allow "SMTP (Simple Mail Transfer Protocol)"

For more details, refer section on the relevant tabs of the configuration interface.

If the TS Adapter IE does not support e-mail, refer to the section "Not possible to send e-

mail".

Result

Once you have set the parameters, you can send an e-mail to an e-mail server from a

SIMATIC CPU via the TS Adapter IE.