Specifications

Working with the TS Adapter IE

7.6 Setting IP Parameters of TS Adapter IE for the First Time

TS Adapter IE

48 Manual, 06/2008, A5E00977705-02

7.6.2 Setting IP Parameters by Direct Connection with the SIMATIC Manager

Requirement

You have a free Ethernet port on your PG/PC.

Procedure

1. Connect the Ethernet port of your PG/PC to the Ethernet port of the TS Adapter IE.

2. Connect the TS Adapter IE to your power supply.

3. In the SIMATIC Manager under "Options > Set PG/PC Interface", set the "S7ONLINE

(STEP 7)" access point to your PG/PC's interface card to which you have connected the

TS Adapter IE.

4. From the SIMATIC Manager menu choose "PLC > Edit Ethernet Node".

5. Click "Help" to find out more about what to do next.

Result

You can now open the configuration interface of the TS Adapter IE in a browser via Ethernet

at the address http://<IP address>.