Specifications

Working with the TS Adapter IE

7.6 Setting IP Parameters of TS Adapter IE for the First Time

TS Adapter IE

Manual, 06/2008, A5E00977705-02

6. Select the TeleService menu command "Options > Set TS Adapter IE IP Parameter...".

If more than one TS Adapter IE is connected to the interface card of the PG/PC, the

"Select TS Adapter IE" dialog box opens.

7. Select the TS Adapter IE based on its MAC address and confirm with OK.

You will find the MAC address under the front panel of the TS Adapter IE.

8. In the "Set TS Adapter IE IP Parameter" dialog box, enter an IP address from your

network which is not used by any other device.

9. Enter the subnet mask of your network.

10. If you want to use the TS Adapter IE as the default router for IP packets, enter the

address of your default gateway.

11. Assign a unique device name for this TS Adapter IE.

12. Confirm with OK.

Result

You can now open the configuration interface for the TS Adapter IE with TeleService via

Ethernet. To do so, select the menu command "Options > Administrate TS Adapter IE".