Specifications

Connecting

5.2 LEDs on the TS Adapter IE

TS Adapter IE

28 Manual, 06/2008, A5E00977705-02

Meanings of the LEDs

Designation Color Meaning

SF Red Group error:

Lights up when the TS Adapter IE detects an error situation on the

modem port or Ethernet interface.

This LED also indicates firmware download operations.

BUSF Red Bus error:

Lights up when the TS Adapter IE detects a static error in the

Industrial Ethernet.

Off when the TS Adapter IE is communicating without error over

Industrial Ethernet.

DC3V Green Lights up when the TS Adapter IE is supplied with the necessary

power.

RX/TX Green Indicates data traffic between the TS Adapter IE and the internal

modem.

The LED flickers when data are being transferred.

DCD Yellow Lights up when a remote connection is established to the TS Adapter

IE via the internal modem.

Off when the remote connection is down.

Flashes three times when the default configuration has been applied

after pressing the P RES button.

RX/TX Yellow Indicates data traffic at the Ethernet port of the TS Adapter IE.

The LED flickers when data are being transferred.

The LED is located behind the front panel.

LINK Green Lights up when the connection at the Ethernet port is active.

Off when the connection at the Ethernet port is cut.

The LED is located behind the front panel.

The indication of possible error states is described in the "Error Diagnostics" chapter.

Startup characteristics

All LEDs are switched on when the power is restored. After a few seconds, the LEDs are set

according to the current operating state.