Specifications

Mounting
4.2 Mounting on Profile Rails
SIMATIC Industrial Software Engineering Tools TS Adapter IE
Manual, 06/2008, A5E00977705-02
19
4.2 Mounting on Profile Rails
Mounting TS Adapter IE
1. Place the TS Adapter IE on the last slot of the profile rail.
The TS Adapter IE does not require the bus connector used on S7-300 modules.
2. Attach the TS Adapter IE ❶.
3. Slide the TS Adapter IE as far as the left side module ❷.
4. Swivel the TS Adapter IE downward ❸.
76$GDSWHU,(
5. Hand-tighten the TS Adapter IE.
76$GDSWHU,(