Technical data

TeleService V6.1 Service Software for SIMATIC S7 and C7
A5E00921336-01
10-1
10 Sending Messages from a Plant
(Sending SMS)
10.1 Requirements for Sending an SMS
If a plant is to send an SMS, certain hardware and software requirements must be
fulfilled. These requirements are described below.
Hardware Requirements:
To send an SMS from a plant, you require a GSM radio modem and a TS adapter.
A TS Adapter I with a version equal to or greater than V5.2 or a TS Adapter II must
be used.
Software Requirements at the Plant End:
The function block FB 48 "SMS_SEND" is supplied with the TeleService product
and is entered into the STEP 7 library when the TeleService S7 library is installed.
If a plant is to send an SMS, the user progam of the plant must call the
FB 48 "SMS_SEND" function block.
Note
You can find additional information about this in the help for the
TeleService S7 Library.