Technical data

TeleService V6.1 Service Software for SIMATIC S7 and C7
A5E00921336-01
8-1
8 Establishing Connections from Remote
Plants (PG-AS Remote Connection)
8.1 Accessing Programming Devices/Personal Computers
from Remote Plants
You can use the TeleService application and a TS Adapter I/II to establish a
remote connection to a remote plant and thus to communicate with this plant. The
initiative for establishing the remote connection comes from the programming
device/personal computer.
However, events which require rapid intervention often occur at a remote plant. In
such cases, when an asynchronic event occurs, the automation system can initiate
a remote connection to a programming device / personal computer.
The following figure shows a graphical representation of the components which are
required to establish a connection from a plant to a programming device / personal
computer.
Note
You can find additional information on this in the help for the
TeleService S7 Library.