Technical data

TeleService V6.1 Service Software for SIMATIC S7 and C7
A5E00921336-01
6-1
6 Configuring the TS Adapter IE
6.1 Procedure for Configuring the TS Adapter IE
You can set the TS Adapter IE parameters both with a direct connection and over
an established remote connection with a modem connection.
1. Select the Options > Assign TS Adapter IE Parameters menu command.
The configuration interface for the TS Adapter IE opens.
2. Set the required parameters in the configuration interface.
3. Close the configuration interface.
Note
You can find detailed information about setting the parameters and additional
information in the help for the configuration interface and in the documentation for
TS Adapter IE.
6.2 Assigning IP Parameters of the TS Adapter IE
You can set the IP parameters of the TS Adapter IE only with a direct connection.
Proceed as follows:
1. Select the menu command Options > Assign TS Adapter IE IP Parameters.
The corresponding dialog box opens.
2. Enter the required IP parameters.
You can obtain detailed help about the individual parameters by pressing the
F1 key.
3. Confirm your settings with "OK".
Note
You can find detailed information about setting the parameters and additional
information in the documentation for TS Adapter IE.