Technical data

Configuring the TS Adapter I/II
TeleService V6.1 Service Software for SIMATIC S7 and C7
5-4 A5E00921336-01
5.7 Importing Adapter Parameters for TS Adapter I/II
You can import the configuration of a TS Adapter I/II from a previously created
export file (*.tap). The configuration saved in this file can be imported into any
number of TS Adapters. This is advisable, for example, if you want to configure
several TS Adapter I/II identically. You can import when operating with a direct
connection or a modem connection (via an established remote connection).
Proceed as follows:
1. Select the menu command Options > Import TS Adapter I/II Parameters.
2. A dialog box is then opened in which you can select the file whose
configuration you wish to import into the TS Adapter I/II.
3. Confirm with "Open". The parameters are then saved in the non-volatile
memory of the TS Adapter I/II.
5.8 Restoring the Default Configuration of a TS Adapter I/II
You can restore the default configuration with which the TS Adapter I/II is supplied
at any time with the Options > Reset TS Adapter I/II Parameters menu
command.