Technical data

Configuring the TS Adapter I/II
TeleService V6.1 Service Software for SIMATIC S7 and C7
A5E00921336-01
5-3
5.5 Setting Up Access Protection for TS Adapter I/II
In TeleService, you can set up access protection for the configuration of
TS Adapter I/II and for the connection to a remote plant when you set the adapter
parameters.
Proceed as follows:
1. Select the menu command Options > Assign TS Adapter I/II Parameters.
The "Assign TS Adapter I/II Parameters" dialog box then opens.
2. Open the "Access Protection" tab.
3. Enter a password for your user name and/or a number to be used by the
modem for a callback after the logon.
Note
• If you are logged in as an administrator, you can change all the settings for
administrators and users as well as set up or delete users.
• If you are logged in as a user, you can only change your own settings
(password and callback number).
4. Confirm with "OK". The parameters are then saved in the non-volatile memory
of the TS Adapter I/II.
5.6 Exporting Adapter Parameters for TS Adapter I/II
You can export the configuration of a TS Adapter I/II to a file (*.tap). The
configuration saved in this file can be imported into any number of TS Adapter I/II.
This is advisable, for example, if you want to configure several TS Adapter I/II
identically or if you want save, document or distribute the parameter set. To export
you can either work with a direct connection or log on as an administrator.
Proceed as follows:
1. Select the menu command Options > Export TS Adapter I/II Parameters.
2. A dialog box is then opened in which you can select the file into which you wish
to export the configuration of the TS Adapter I/II.
3. Confirm with "Save". The parameters of the TS Adapter I/II are then saved in
the specified file (*.tap).